To test the OpenConnect network,follow these organized steps:

1. Set Up the OpenConnect Core:

   Install the OpenConnect Core and ensure all necessary devices are connected to the correct ports. Each device should be linked to a specific port on the Core.

2. Configure Port Numbers:

   Verify the correct port numbers for the OpenConnect Core. The ports are typically 135 and 136.

3. Connect to the Server:

   Use the OpenConnect Core to request a server connection. Ensure the correct port number is selected in the request.

4. Verify Server Response:

   Check the server response to confirm the connection was successful. If the response is not received, examine the port settings or command sent.

5. Use the Server:

   Once connected, use the server's services as needed.

6. Troubleshooting:

   If the connection fails, check port numbers and IP addresses. Ensure ports are correctly assigned and addresses are correct.

7. Port Configuration Check:

   Confirm that the ports assigned to server and end-user devices are correct.

8. Use Debug Statements:

   Implement debug statements to monitor responses and ensure connection success.

9. Security Considerations:

   Be cautious of security measures, ensuring commands are secure and protocols are used correctly.

10. Documentation and Tutorials:

    Review OpenConnect documentation and forums for additional insights and common issues.

By following these steps, you can successfully test and configure the OpenConnect network.